Enclosed patio ideas – To build enclosed patio ideas, start with Dig into the soil and remove a total depth of 10 inches of soil from the area. Test the depth with a tape measure and then examine the area with a level. Remove extra soil to create a gentle downward slope from the house to prevent rainwater from pooling against home foundation. Tamp the soil down into the patio area using a hand tamper. Pound down to the ground for compact soil. Check the smoothness of the area again to secure the ground slopes away from the house.
Apply a 3-inch layer of coarse gravel to the bottom of the enclosed patio ideas area to promote proper drainage in the area. Tamp down this layer of gravel and control the slope of the area. With the same size gravel, apply another 3 inch layer. Tamp down and see the slope of the area again. Apply a final 3-inch layer of gravel on top of coarse gravel. Tamp down this material and see the slope again. Adjust the layer needed to maintain the slope. Start using the slopes of the patio surface, which starts toward the house and works outward in all directions.
12 Picture Gallery: To Build an Enclosed Patio Ideas
Again half empty spaces between the house and either and between each slate. Use a rubber hammer to drain sandstone into place, maintaining the downward slope away from the housing. Continue to place rather until you fill the entire patio area. Dump a wheelbarrow full of masonry sand out onto the patio surface. Use a broom to sweep sand into the spaces. Compress the sand into the holes using a wall trowel. Use more sand as needed to fill the gaps between the pits after compaction of sand in the holes. Sweep extra sand off the enclosed patio ideas surface.
This post topic: Ideas