Outdoor porch swing is a relaxing addition to your garden or patio. A simple mail and top rail from stock timber can support a two or three person bench swing. You can do this project to sit with your favorite person and watch sunset together while enjoying a relaxing cup of your favorite herbal tea. Cut two bench back braces from 1-inch with 2-inch stock timber as shown in drawing that accompanies this step. Backs should be 2 inches by 1 inch by 24 inches.
Makes them from 2 inches wide at a point two inches from one end, down to one in wide at other end. Cut three seat bottom pieces 18 inches long and 2 inches by 1 inch. Cut two 5-meter, 10-inch long and back frame pieces from 1-inch with 2-inch stock timber. Place between two of back hangers and safe to use 1/4-inch diameter, 2-inch long galvanized wood screws. Cut 1/2-inch by 2-inch stock timber to fit across outdoor porch swing back and seat.
12 Picture Gallery: Smart Tips Outdoor Porch Swing to Make Your Afternoon Good
Safe with 1/4-inch diameter, 3/4-inch long galvanized wood screws. Place pieces 1/2 inch apart across seat and back until it is covered as shown in drawing. Attach two eye hooks to each end of bench in positions shown in drawing. Attach coated chain to one eye hook with open S hooks. Pass it through galvanized ductile iron outdoor porch swing braces and down to other eye hook. Use vice grips to clamp S hooks closed.
This post topic: Furniture