Basement bathroom plumbing – Replacing some of the drainage pipeline may not be the purest do-it-yourself project, but is one that someone with some basic plumbing skill. The difficulty of replacing a part of the sewer line is dependent on the location of the part of the sewer pipe to be replaced and the material that the line is made of. While plastic PVC pipes are commonly used for this type of line, some drainage pipes are made in service weight cast iron.
12 Picture Gallery: How to Replace Basement Bathroom Plumbing
If the basement bathroom plumbing is underground, use a shovel to dig the drainage pipe to be replaced. When digging the drainage pipe, make sure to dig at least six inches past each end of the stretch replacing having enough space to work with the pipe. Cut the line replaced with PVC saw if the drainage pipe is made of PVC; Use a lock cutter or iron snap for service weight cast iron. When cutting off the pipe, make sure the fittings will be used to connect to that part of the drainage pipe.
Apply primer to the ends of the tube where the distance to be replaced is cut out; apply primer to the clutches as well. As in the previous step, if you use cast iron service weight, this step is not needed. Put the new tube in the place where it will determine how long to cut the pipe. When cutting the replacement tube, make sure that at least one to two inches fit inside the coupling on each end. Cut the basement bathroom plumbing to the correct size for the drain pipe replaced, using PVC saw for PVC or cast iron snap or lock mill for cast iron.
This post topic: Plan